Large animal feed extruder trouble repair methods
1. The body appeared strange sound, bearing rotten, worn, lack of oil. Maintenance methods: open a large pulley, the front of the material part of the spindle after the hammer out. Press the original first good after the bearing, the screws on the solid cover, and then into the front bearing, to replace the oil seal, add the lubricating oil, do not add oil.
2. Screw (thrusters) generally produce about one hundred thousand pounds will wear, production decline, not puffed.
Approach: replace the new screw (propeller). Under normal circumstances, the new propeller with old sets, the new set with the old shaft (propeller).
3. Outlets large, should be replaced by holes.
4. For other reasons, the material nut can not be opened, the tool can be used to open the handle sets, with a vise clamp, with oxygen heating apart.
If you're satisfied with our large animal feed extruder, welcome to place orders with our factory. We're one of the leading Snack Food Production Line manufacturers in China, strong in technical advantages and rich in qualified experts. For customized orders, contact us now.
We're Here to Help