Horizontal ribbon mixer consists of U-shaped container, ribbon mixing blades and transmission components. Ribbon spiral blade is generally made of double or three, the outer spiral material from the two sides to the central pool, the inner spiral material from the central to both sides of the transfer, the formation of convection mixed. Ribbon mixer with viscous or cohesive powder and granule mixture of powder and granular material to add liquid and paste mixed with good results, the lid can be made into a fully open door, in order to facilitate the cleaning equipment And replacement products.
The horizontal ribbon mixer is driven by the inner and outer spirals installed on the stirring shaft to propel the material in the barrel so that the blender can flip the material in the widest range of the barrel. Stirrer structure, the spiral designed to be inside and outside, left and right each other anti-spiral, agitator work within the helix drive shaft near the center axis of rotation, the axial from the inside to both sides of the push, driven by the outer spiral material near the wall to do The axis of rotation, the axial push from both sides to the inside, then cause the material in the barrel convection cycle, shear seepage, to complete the rapid mixing of materials in a short period of time.
1. Driving Advantages: The standard products adopt the belt pulley to drive the cycloidal speed reducer to drive. Compared with the high torque of the gear reducer, the elastic connection of the belt drive has the advantages of protecting the transmission components under overload.
2. Flexible disassembly: The ribbon screw shaft is connected with the drive shaft flange in the cylinder body, which can be quickly disassembled when needing to repair or change the type of mixing shaft. Flexible disassembly design makes the U-shaped tube and the two end plates are completely welded to avoid the accumulation of cracks produced by the connection of the cylinder body and reduce the residual.
3. Disconnect spiral ribbon: Disconnect spiral ribbon relative to the continuous ribbon, the shear material produced more movement, and the material can flow in the formation of more eddy current, speed up the mixing speed and improve the mixing Evenness.
4. Discharge form: Discharge form is generally pneumatic (manual) flap valve, arc valve is tightly embedded in the cylinder, flush with the cylinder wall, no material accumulation and mixed dead angle, reliable edge seal, to ensure that in Frequent switch without leakage.
5. Cooling and heating: In the mixer barrel to increase jacket, through the jacket into the hot and cold medium to achieve the material cooling or heating; cooling general industrial water, heating can be passed steam or electric heating oil .
6. Spindle seal: When mixed with ultra-fine powder, the main shaft seal can increase the air-tightness and effectively block the circulation of powder inside and outside the cylinder.
If you're satisfied with our horizontal spiral belt mixer, welcome to place orders with our factory. We're one of the leading Horizontal Batch Mixer manufacturers in China, strong in technical advantages and rich in qualified experts. For customized orders, contact us now.
We're Here to Help