Non-gravity biaxial paddle mixer has a strong and efficient features, the mixing time is short, the design of the mixing time of 1 to 3 minutes, 1: 1000 ratio of uniformity is greater than 95%, two horizontal axis of the mixing shaft isokinetic reverse Rotation, the special angle of the shaft layout of the blades to ensure that the material radial, circular, axial three-throwing movement, the formation of complex cycle, in a very short period of time to achieve uniform mixing.
1. Mixing effect: Even if the material has the difference of specific gravity and particle size, it can also achieve good mixing effect under the rapid and violent churning of staggered arrangement of stirring blades.
2. Crushing device: When the material has the phenomenon of agglomeration, increase the crushing device. The "crushing stick" with triangular gear cover should keep the high speed above 1400rpm. The agglomerating material will be crushed and depolymerized in the area of weight loss.
3. The material form: the material form is generally pneumatic (manual) flap valve, arc valve tightly embedded in the cylinder, flush with the cylinder wall, no material accumulation and mixed dead angle phenomenon; Open the door open to the cylinder, discharge clean and fast, less residue.
4. Two-piece blade: In order to reduce the replacement cost of the wearing parts of the equipment, the blade can be made into two slices. A movable small blade can be padded on the base of the blade, which can replace the worn small blade directly and is economical and quick.
5. Clearance between blade and cylinder: The gap between blade and cylinder wall directly affects the mixing effect and material residue in the body after discharging. The gap between blade and cylinder of our company is controlled from 3 to 5mm.
6.20 cubic meters full capacity: This series of mixer can do the largest volume of 20 cubic meters, for large format transmission equipment, mixer base, etc. are very different from the normal specifications.
If you're satisfied with our no gravity biaxial blade mixer, welcome to place orders with our factory. We're one of the leading Horizontal Batch Mixer manufacturers in China, strong in technical advantages and rich in qualified experts. For customized orders, contact us now.
We're Here to Help